4.8. Finishing installation

4.8.1. Removing existing DHCP RPM package

Up to now, all the necessary RPM files are installed for server and client access. The installer will check if you have the DHCP RPM installed on this system. If yes, you are advised to remove it as Aptus server daemon is compatible with the Internet Software Consortium DHCP 2 package. If you are using a different version of DHCP server, say no.

4.8.2. Create client boot disks (optional)

The installer will ask you to create Aptus client boot floppy disks. You may want to say 'Y' here is you don't have PXE boot ROMs at the client or you want to use boot floppies to boot your clients. Please see the section Chapter 6.

4.8.3. Checking license file

Lastly, the installer will check if you have the license file ready in the system. If you don't have a license file, Aptus server will not be able to start. Please make sure you have copied the aptuslic.txt file to /etc/shaolin before configuring Aptus server.

The installation has complete, next you will have to connect to the Webmin interface and start configure your server.