ShaoLin HA Cluster 1.0 Installation Manual and Operations Guide
Prev
Next
III. Cluster Operations and administration
Table of Contents
8.
Controlling ShaoLin HA Cluster Manager
8.1.
Using Cluster Manager Console
8.1.1.
Hot keys (for console interface only)
8.1.2.
Locked mode (for console interface only)<
8.2.
Standby cluster console
8.3.
Connect to the standby cluster from the active cluster
8.4.
Connect to the active cluster
8.5.
Control heartbeat channels
8.6.
Control an application service
9.
Tuning the clusters
9.1.
Using journaling filesystems
9.1.1.
Convert existing ext2 filesystem to ext3 filesystem
9.2.
Adjusting Heartbeat Settings
10.
Cluster Administration
10.1.
Making changes to cluster configurations
10.1.1.
Boot loader configuration
10.1.2.
Testing Cluster Configurations
10.2.
Installing new applications and services
10.3.
Storage Management
10.3.1.
Altering partitions and disk drives
10.3.2.
Linux software RAID (MD) and Logical Volume Manager (LVM)
10.3.3.
SAN and storage enclosures
10.4.
Adding hardware peripherals
10.4.1.
Notes on changing network configurations
10.4.2.
Notes on adding/remove storage devices
10.5.
Upgrading the kernel
11.
Event notification and logging
11.1.
Logging
11.1.1.
Event Log
11.1.2.
System Log
11.2.
Email notification
11.3.
SNMP
Prev
Home
Next
Monitoring a referenced IP address
Controlling ShaoLin HA Cluster Manager
