| 3001 | Fail setup SMA |
| 3002 | Fail setup IP Monitor Agent
|
| 3003 | Critical Channel Failure
|
| 3004 | Channel Failure
|
| 3006 | IP Monitor Channel Failure
|
| 3008 | Too few alive channels
|
| 3009 | Fail to run remote monitoring service.
|
| 3010 | Fail setup AAC
|
| 3011 | Can't open /proc/slhakhbd/.control for reading
|
| 3012 | Can't open file for writing
|
| 3013 | Adding unsupported khbd channel type
|
| 3014 | send khbd command malloc error.
|
| 3015 | Can't open global config file for reading
|
| 3016 | Unknown option in global config file
|
| 3017 | Can't open serial config file for reading.
|
| 3018 | Unknown option in serial config file
|
| 3019 | Can't open ethernet config file for reading.
|
| 3020 | Unknown option in ethernet config file
|
| 3021 | Can't open IP channel config file for reading
|
| 3022 | Unknown option in IP channel config file
|
| 3023 | Invalid parameter for command to change AAC/SMA status.
|
| 3024 | create serial heartbeat error
|
| 3025 | setial tty setup error
|
| 3026 | open serial tty error
|
| 3027 | Can't receive serial heartbeat msg.
|
| 3028 | create ethernet heartbeat error
|
| 3029 | ethernet channel socket() error
|
| 3030 | Can't bind to interface.
|
| 3031 | Up ethernet interface error
|
| 3032 | Error setting default gateway
|
| 3033 | Error setting IP address
|
| 3034 | Error setting IP alias
|
| 3035 | create IP heartbeat error
|
| 3036 | IP channel socket() error
|
| 3037 | Fail to create the synchronization thread.
|
| 3038 | Remote monitor thread init_listen_socket error
|
| 3039 | Remote Monitoring Reply Error
|
| 3040 | Remote monitor thread poll error.
|
| 3041 | Remote monitor thread accept error.
|
| 3042 | Fail to create remote monitoring server.
|
| 3043 | Fail to create AAC thread
|
| 3044 | AAC run command fork failed.
|
| 3045 | AAC status fail.
|
| 3046 | Create SMA thread fail
|
| 3047 | SMA dynamic load library fail
|
| 3048 | SMA status checking fail
|
| 3049 | Create IP Monitor thread fail
|
| 3050 | IPM status checking fail
|
| 3051 | Fail shutdown interface
|
| 3052 | Can't get sysinfo
|
| 3053 | set_console_tty can't open tty
|
| 3054 | unknown power switch type
|
| 3055 | Fail to create power switch thread.
|
